Tiling adhesive

s3

Surimassa cementlijm C1TE  Tiling adhesive

Application

Surimassa cementitious adhesive C1 is a tiling adhesive for ceramic wall and floor tiles till a size of 45 x 45 cm, mozaiek , concrete- and cement stone blocks.

Surimassa cementitious adhesive C1 has good anti slip properties, is water resistant, fire resistant . The product adheres excellently to stony surfaces like concrete ,cement , stone a. o.

Working

Mix 1 bag Surimassa Cementitious Adhesive C1 in 6 liters of clean water with a mortar mixer till a  smooth lump free paste is obtained. Mix the mortar well again after 5 minutes of maturing. The mixture is now ready and can be used for approximately 4 hours.

Surfaces must be clean ,dry, strong and crack free.

Apply the adhesive to  the surface with a notched trowel with rectangular teeth. Choose a tooth size so that each tile is set at least 80% fully in the adhesive.( for outside 100%). Apply the tile with a sliding movement into fresh adhesive. Open time is depending on temperature, humidity and air circulation maximum 20 minutes.

Concrete- and cementstone blocks must always be applied in the still fresh damp mortar.

Attention

Do not use below 5° C and above 30 °C .

Store dry. In unopened bag the shelf life is at least 12 months.

Contact Us

Afobakkaweg no. 1960 Mast 15 Klein Powakka, Para, Suriname Phones: 8514521/ 8596307 Email: [email protected]

About Us

Surimassa Industries N.V. provides construction services and products: This is understood to mean the manufacturing of various tile adhesives, and the provision of services in residential and non-residential construction.

Additional info